What are the advantages of pivot doors?

Benefits of Installing Pivot Doors

Most people do not think twice about their front door unless it is difficult to open and shut. One of the most innovative new door designs is the pivot door. These doors stand out due to their size and the way they open. With a pivot door, guests to your home will be surprised and intrigued the moment they step through your door. A pivot door stands out from most other doors in the neighborhood as it is not restrained to only being an average size due to the high position and low position pivot hinges. These doors will not sag, drag, or start to close on their own as they are not restricted in size. With the right hinges, you can have larger doors that are tall and wide and not have any issues whatsoever. Because they have a different style of hinges, they will not sag, start to close themselves, or drag on the floor.

Big and Bold Without Sagging

Most average sized doors are restricted to being an average size thanks to their hinges. Because of the hinges, doors can only be so tall or wide. If you try to exceed those limitations, the hinges groan and eventually fail. If you try to make a door an average height or an average height and use size, those hinges will fail. Do not be surprised if those hinges leaving the door dragging on the floor, and above everything else, it will be a source of embarrassment.

Unlike other options, a pivot door has no such limitations. Because weight travels straight through the robust bottom pivot, the frame supports far less. Thus, pivot doors can be built larger than their competitors both in height and width. Moreover, their material construction can be far heavier as well, utilizing solid wood, steel, or thick glass panels. The best part is that some pivot systems can handle weights up to 500 kilograms, which is more than 1000 lbs. Such a door makes your entrance more unique than anything else in your neighborhood.

The Smooth Feeling You Need to Experience

Imagine a door you can push open with your finger, even a door leading to a bank vault. While this may be too far fetched, the Patina pivot doors are almost at that ideal. With the traditional hinge system, doors have a tendency to stick at some point and creak loudly. This is especially noticed when the door is in a frame, and has a regular hinge. Just like the hinge gets worn out, the Patina pivot doors mechanism gets worn out too. But that is a problem of the past. The Patina pivot door has a precision bearing at the top and bottom that rotates around a nearly frictionless axis. This makes the door pivot open very easily.

The door movements evoke a feeling of gentle fluid motion that brings to mind even more luxurious materials, and rather than a slamming noise, many of these pivoting systems use a type of hydrodynamic technology to bring about a more controlled and quieter door. Through closed, soft and dampened pivot shocks, you are ensured that the door is being closed smoothly and softly. All of this minimizes the experience of just another plain action that we routinely do like going through a door to a rather drawn out experience.

Saves You Useful Floor Space

When you think of a door, think of a regular door, and one that is hinged on a side and that rotates open rather than slide, and perhaps does so like a pendulum. This rotation breeds a conspiracy, a big secret, and that is the swing path that the door obsesses over and takes up a lot of floor area. This rotational path takes up plenty of area, and area, as they say, is a precious commodity, especially in small places, like narrow hallways and confined spaces like small and tight entry ways.

A pivot door is unique in the fact that, while a door may traditionally swing open at the edge of the door with respect to a hinge, a pivot door does so with respect to a center point like that of a rotary paradigm. This means that the area that the paths this door will cross will be minimal, and the needs of spatial contiguity will be well above par. Even architect pivot systems will love this spatial paradigm.

Made to Outlast Regular Doors

Standard doors have an average life span of about 5 years before they begin to sag and produce unsightly gaps. Why is this? All of a standard door's weight is supported by three or four screws that hold hinges into a frame. The screws are constantly battling gravity. Over time, they loosen. The holes widen. The screws are pulled to the floor and the door begins to sag. You will see the top gaps widen, while the bottom scrapes the floor.

In contrast, a pivot door is designed to be more balanced. The bottom pivot is extremely durable and affixes to the ground rather than hanging from a framework. Since the door is not hanging from above, every part is not slowly being pulled apart. The door is able to hold its original position for years without needing touch ups. To top it all off, most pivot doors are full metal edge banded or reinforced to prevent warping and extreme weather.

Looks Incredible with Any Style You Want

This is the best part. A pivot door is as customizable as you want it to be. For a more natural design, consider solid slab wood, which has beautiful textures. For a more sterile, modern, and contemporary design, consider a door with a steel frame and glass panels. A pivot door can also be used as a design staple to introduce natural light to your designs. For a more bright, airy design consider a full glass pivot door. This design also has the benefit of connecting your living room to the outdoors.

Unlike most doors, the hardware is hidden from view, so the pivot door can take full ownership of the design. All the attention is on the door itself, rather than its hinges or handles. The flexibility of design means it can be easily adapted to a rustic farmhouse vibe or an ultra modern frame, and of course, can suit your vision.

What to Know Before You Buy One

Let us get one thing straight right away. Pivot doors are awesome. As great as they are, they are a bit of an investment. A few things to keep in mind before taking the plunge. You must be careful with the installation. Your installer will need to be a true professional because the pivot hardware must be aligned with the floor and the top of the door frame, the header. This is not the place to try and save money by going with a cheap installer. A bad install will ruin the whole door.

You are going to spend more money than you would on a standard door. However, it is worth it. You get a door that is more advanced, and is engineered with better, stronger materials, not to mention a more specialized installation. All of this will give you a door that is not only more attractive than a standard door, but will also last you decades without any sagging, sticking, or any deterioration in visual appearance. The transformation is so dramatic that most people are left feeling like they will never go back to a standard door. This is the type of renovation that you are left wondering why you had not done it sooner.